wifi point to point

Published by on

"Disclaimer: We are using Amazon affiliate Product Advertising API to fetch products from Amazon, include: price, content, image, logo, brand, feature of products, reviews which are trademarks of Amazon.com. So, when you buy through links on our site, we may earn an affiliate commission." Learn more

We’ve spent hundreds of hours researching and comparing wifi point to point of all specifications to find the best one for any need (or budget). Here are the results.

The Best wifi point to point of 2020 – Top Rated & Reviewed

2,059 Reviews Scanned

SaleRank No. #1
The EZ-Bridge-Lite EZBR-0214+ High Power Outdoor Wireless Point to Point System
  • The EZ-Bridge-LT+ is a high power outdoor 250mW wireless bridge system operating in the 2.4GHz unlicensed frequency spectrum providing real world thruput up to 100 Mb/sec.
  • It complies with the 802.11g and n standards to insure interoperability.
  • The EZ-Bridge-LT+ creates a transparent wireless bridge between two networks up to 3 miles apart with good line of sight.
  • It is the perfect plug and play solution for connecting the networks in two or more buildings, internet access sharing, remote video surveillance or remote network access.
  • Multiple EZ-Bridge-LT+ units can be connected in a mesh configuration to allow interconnecting more than two sites.
Rank No. #2
KuWFi 2-Pack 300Mbps Wireless Outdoor CPE Kit Point-to-Point Wireless Access Point 2.4G WiFi Bridge Supports 1KM Transmission Distance Solution for PTP/PTMP (Pre-Program)
  • 【What CPE120 is】KuWFi CPE120 is an 300Mbps Outdoor Wireless WiFi Bridge support 1KM Long Range WiFi Extender with LED display to configure the PT/PTMP connection, AP + Bridge operation mode, more stable Support AP and bridge operation mode, simple to built the PTP/PTMP connections, meet with multiple Wi-Fi transmission scheme demands. Outdoor Wireless CPE Bridge Waterproof, dust proof, lighting protection. Operating Temperature: -30℃-55℃ Storage Temp: -40℃-70℃
  • 【Multiple operation mode,suit for different network & environment】 Point to Point/Multi-Point Connection (1-4) for Elevator Monitor/surveillance networks: Connect an IP Surveillance Camera to CPE120’s secondary port and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage. Tethering a series of IP Camera to the CPE120 give you 'eyes on' places you might not otherwise see. Easy to set CPE with IP cameras & networks DVR
  • 【Point to Point Connection for Wireless Coverage】 Multi-Mode wireless wifi bridge with ethernet port and LED display: Support Wireless AP, Repeater operation mode; Support SSID broadcasting, Multi SSID up to 4; Support DHCP server; WiFi coverage before 2 houses with 1KM distance
  • 【Tips on product how to use 】Its LED Display can show operation mode/channel/signal strength, its H/C switch ctrl the Master/Slave units, no need to access into GUI, press reset 1s will automatic paired; avoid the complex setup program. It transmits via wireless WiFi, reducing the trouble of wiring cable. If it is passing the wrong gateway and DNS information. You can try to put a manual IP address with Gateway address from the original modem along with your choice of DNS
  • 【Customer Service】For 30 days after the date of purchase, return your undamaged KuWFi product and receive a full refund for ANY reason.12-month warranty for quality-related issues For 12 months after the date of purchase we take care of all quality-related issues with a REPLACEMENT OR FULL REFUND
Rank No. #3
TP-Link 2.4GHz N300 Long Range Outdoor CPE for PtP and PtMP Transmission | Point to Point Wireless Bridge | 9dBi, 5km+ | Passive PoE Powered w/ Free PoE Injector | Pharos Control (CPE210) , White
  • Built in 9dBi 2x2 dual polarized directional MIMO antenna
  • Adjustable transmission Power from 0 to 27dBm/500mW
  • System level optimizations for more than 5km long-range wireless transmission (only for paired Point-to-Point or Point-to-MultiPoint transmission)
  • TP Link Pharos tdma (Time Division Multiple Access) technology improves product Performance in throughput, Capacity and latency Performance
  • Centralized management system Pharos Control
Rank No. #4
KuWFi 2-Pack Wireless Long Range WiFi Bridge 5.8G 900Mbps Point to Point Access Point Indoor/Outdoor AP CPE Kit Supports 2-3KM Anti-Interference for PTP/PTMP
  • 【What KuWFi CPE200M is】an 11AC 5GHz 900Mbps Long Range WiFi Extender Outdoor Wireless Bridge CPE Kit with ethernet port. The Wi-Fi range to up to 2-3KM and with LED display to configure the PT/PTMP connection, more stable Support AP and bridge operation mode, simple to built the PTP/PTMP connections, meet with multiple Wi-Fi transmission scheme demands. Outdoor Wireless CPE Bridge Waterproof, dust proof, lighting protection. Operating Temperature: -30℃-55℃ Storage Temp: -40℃-70℃
  • 【Multiple operation mode,suit for different network & environment】 Connect an IP Surveillance Camera to CPE200M’s secondary port and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage. Tethering a series of IP Cameras to the CPE200M gives you 'eyes on' places you might not otherwise see. Easy to set CPE with IP cameras and networks DVR
  • 【Point to Point Connection for Wireless Coverage】 Multi-Mode wireless wifi bridge with ethernet port and LED display: Support Wireless AP, Repeater operation mode; Support SSID broadcasting, Multi SSID up to 4; Support DHCP server; WiFi coverage before 2 houses with 2-3KMdistance. It transmits via wireless WiFi, reducing the trouble of wiring cable
  • 【Tips on product how to use 】Its LED Display can show operation mode/channel/signal strength, its H/C switch ctrl the Master/Slave units, no need to access into GUI, press reset 1s will automatic paired; avoid the complex setup program. If it is passing the wrong gateway and DNS information. You can try to put a manual IP address with Gateway address from the original modem along with your choice of DNS
  • 【Customer Service】For 30 days after the date of purchase, return your undamaged KuWFi product and receive a full refund for ANY reason.12-month warranty for quality-related issues For 12 months after the date of purchase we take care of all quality-related issues with a REPLACEMENT OR FULL REFUND
Rank No. #5
5.8G Wireless Bridge PTMP WiFi PTP Point to Point Access Outdoor Network CPE 2KM Transmission Distance with 12DBi High-Gain Antenna 2 LAN 100MBps Ethernet Port 24V PoE Power Supply 2 Pack
  • Bluedery CPE220 wireless bridge is a 5.8G Long Range WiFi Extender Outdoor CPE with a digital display. It complies with the 802.11a and 802.11n,standards to ensure interoperability. Point-to-point pairing also can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, make the long-range wireless coverage, data transmit, and wireless monitoring simple and professional.
  • PTMP Pre-programmed: Out of the box, connect the 2 wireless bridges and PoE adapters through the ethernet cable for power supply, and wait for 1 minute for the "Link" green indicator to light up to indicate that they have been automatically paired succeeded(Point to Point). Suitable to extend the internet to your garage, barn, warehouse, store via wireless transmission, instead of laying out the ethernet cable.
  • Using 5.8G / 300Mbps wireless transmission rate between wireless bridges can support 2KM transmission distance(Barrier-free), and can provide up to 100Mbps wired network speed, suitable for connecting the networks in 2 or more buildings, internet access sharing, remote video camera surveillance, or remote network WiFi access.
  • Extend the network to another building within 2KM through a point-to-point method. The master CPE receiver is connected to your internet through a PoE adapter, and the slave CPE transmitter is connected to the router(AP mode) or directly to the computer through a PoE adapter to expand your network/WiFi to another building, such as expand your home network to store.
  • Realize remote camera video surveillance or elevator monitoring through wireless bridge point-to-point or point-to-multipoint. The master CPE receiver is connected to a DVR, or monitor, or computer through a PoE adapter, and the slave CPE transmitter is connected to an IP Camera through a PoE adapter to expand your camera surveillance range. Reference pictures are easy to connect CPE with IP cameras & networks DVR.
Rank No. #6
KuWFi 2-Pack 900Mbps 5.8G Outdoor Wireless Bridge Long Range Point to Point Transmitter Distance WiFi Transmitter 14DBi High Gain Antenna with Gigabit RJ45 Port IP65 Waterproof
  • 【What N620 is】KuWFi N620 is an 900Mbps Outdoor Wireless WiFi Bridge support 2-3KM Long Range WiFi Extender with LED display to configure the PT/PTMP connection,900Mbps High Speed & NAT High Conversion Rate with Multiple power supply methods N620 comply with 802.11A/N/AN/AC technology to provide up to 900Mbps wireless access speed,and high NAT conversion rate of over 93% to achieve faster download/upload speed, making online surfing faster.
  • 【Simple & Efficient Pairing】 No Need to be professional nor have a computer, matching the host & subordinative bridge just by setting the Nixie tube the same number (within 8 points). two units with same Digital number mean paired it is a wifi bridge with low power consumption, strong security. With PTP, PTMP, bridge operation mode, widely be used in voice, video, data transmission in long range wireless monitor industrial.
  • 【Point to Point Connection for Wireless Coverage】 Multi-Mode wireless wifi bridge with ethernet port and LED display: Support Wireless AP, Repeater operation mode; Support SSID broadcastingSupport DHCP server; WiFi coverage before 2 houses with 2-3 KM distance
  • 【Multi operation mode: Bridge mode( Master/Slave).】Geteway mode With operation of Bridge mode ,it can Bridge wifi signal with one place to other place in 2-3Km disatnce , then share with others. no need to access into GUI. with Geteway mode work with Broadband account password.
  • Considerations:Master CPE :The CPE 1000M Lan port conenct to POE adapter POE port,The POE Lan Port conenct to PC network cable , and CPE 100M connect to other router have internet service. Slave CPE :The CPE 1000M Lan port conenct to POE adapter POE port,The POE Lan Port conenct to PC this two unit should be have internet service. please donnot use 100M to conenct POE , it will be damage
SaleRank No. #7
Wireless WiFi Bridge,Riiai CPE881 5.8G Point-to-Point Access Outdoor CPE Kit Long Range Transmitter Supports 2.5KM Transmission Distance with 14 dBi High-Gain Antenna,2-Pack
  • Technical Support & Note: The installation of this device requires some network knowledge. When you cannot connect to them, please contact us or look for a professional to assist. 2 CPEs have been paired before sending it to you, you don’t need to pair them again. When the CPE is reset, IP of this setting is 192.168.0.1. After resetting, you can reset the IP address after accessing through 192.168.0.1. Get the latest version of the PDF manual by contacting us.
  • 【What 8881 CPE is】TOMLOV is a 100Mbps PoE output outdoor wireless WiFi bridge support 2.5KM 5GHz long-range WiFi extender with LED indicator meet with multiple wireless transmission scheme demands. The transmission speed between 2 bridges max is 450Mbps. The highest network speed that can be achieved max is 100Mbps. Outdoor wireless CPE bridge waterproof, dustproof, lighting protection. Operating temperature: -20℃-70℃/storage temp: -40℃-85℃.
  • 【Point to Point Connection Mode】Multi-Mode wireless wifi bridge with an ethernet port and LED indicator. Support wireless AP, wireless signal transmit before 2 houses with 2.5KM distance.
  • 【 How To Use Product 】Wireless bridge LED indicator can show signal strength, easy to set via computer. Setting CPE master mode as AP mode, slave mode as Client mode. Click " Scan" in the settings of the slave mode, scan to the CPE SSID of the master mode to be connected, and then make the connection settings. It transmits via wireless signal, reducing the trouble of wiring cable.
  • 【Widely Applications】Any place required security monitoring by cameras Point to Point/Multi-Point connection Client Bridge for Elevator Monitor, surveillance networks. Outdoor CPE Connect an IP Surveillance Camera to a secondary port and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage.
Rank No. #8
TRENDnet 14 DBI WiFi AC867 Outdoor Poe Preconfigured Point-to-Point Bridge Kit, 4 DBI Directional Antennas, for Point-to-Point WiFi Bridging Applications, 5GHz, AC867, TEW-840APBO2K
  • 5GHz WiFi AC867 point-to-point bridge kit
  • Includes two preconfigured TEW-840APBO access points
  • 14 dBi directional antennas
  • Supports Access Point, WDS Bridge, WDS Access Point, WDS Station, and Client Bridge modes
  • Proprietary PoE power adapters included
Rank No. #9
CPE220 5.8G Wireless Bridge PTMP WiFi PTP Point to Point Access Outdoor Network CPE 2KM Transmission Distance with 12DBi High-Gain Antenna 2 LAN 100MBps Ethernet Port 24V PoE Power Supply 2-Pack
  • GOODTHREE CPE220 wireless bridge is a 5.8G Long Range WiFi Extender Outdoor CPE with a digital display. It complies with the IEEE802.11a and IEEE802.11n,standards to ensure interoperability. Point-to-point pairing also can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, make the long-range wireless coverage, data transmit, and wireless monitoring simple and professional.
  • PTMP Pre-programmed: Out of the box, connect the 2 wireless bridges and PoE adapters through the ethernet cable for power supply, and wait for 1 minute for the "Link" green indicator to light up to indicate that they have been automatically paired succeeded(Point to Point). Suitable to extend the internet to your garage, barn, warehouse, store via wireless transmission, instead of laying out the ethernet cable.
  • Using 5.8G / 300Mbps wireless transmission rate between wireless bridges can support 2KM transmission distance(Barrier-free), and can provide up to 100Mbps wired network speed, suitable for connecting the networks in 2 or more buildings, internet access sharing, remote video camera surveillance, or remote network WiFi access.
  • Extend the network to another building within 2KM through a point-to-point method. The master CPE receiver is connected to your internet through a PoE adapter, and the slave CPE transmitter is connected to the router(AP mode) or directly to the computer through a PoE adapter to expand your network/WiFi to another building, such as expand your home network to store.
  • Realize remote camera video surveillance or elevator monitoring through wireless bridge point-to-point or point-to-multipoint. The master CPE receiver is connected to a DVR, or monitor, or computer through a PoE adapter, and the slave CPE transmitter is connected to an IP Camera through a PoE adapter to expand your camera surveillance range. Reference pictures are easy to connect CPE with IP cameras & networks DVR.
Rank No. #10
KuWFi Long Range WiFi Bridge 11ac Outdoor Access Point to Point Wireless Bridge High Speeds 5.8G 900M Support PoE 2-Packs
  • KuWFi CPE550 Outdoor Wireless Bridge is a 5 GHz high-powered long-distance 11AC wireless outdoor AP/client bridge offering dual-PoE Ethernet ports and a high-gain directional antenna that emits a narrow signal beam, limiting interference and ensuring stable connectivity, high-bandwidth and 867 Mbps speeds over long distances.
  • Long-Range 11ac Outdoor Access Point/Wireless Bridge High Speeds & Optimal Bandwidth at Extended Point-to-Point or Point-to-Multi-Point Ranges
  • Powerful 18dBi High-Gain Antennas Extend Networks to 5 Miles Point-to-Point
  • Optimal Bandwidth Supports Heavy Video Delivery Over Long Distances
  • PoE-Compliant Ports Offer Flexible Power Options for an IP Camera or AP,360-Degree, 3-Axis Pivoting Arm Locks for Precision Alignment

Top Rated wifi point to point to Buy Now

 

wifi point to point Reviews on Twitter

[custom-twitter-feeds search=”wifi point to point”]

Why You Should Buy Best wifi point to point from Amazon

Amazon is not the only store that sell wifi point to point. However, there are several compelling reasons why you should buy wifi point to point from them, with the suitable Price and Reviews. Here are five:

(1) Amazon Makes Shopping wifi point to point Personal

Amazon is very good at making recommendations of wifi point to point based on your search history. From time to time, they will even show you discounted prices on wifi point to point that you previously expressed an interest in. They also make your shopping experience a little easier by showing you items that you recently viewed.

(2) Amazon Checkout is Easy

Amazon checkout is easy, especially if you already have an account. You can add wifi point to point to your cart and go through a multi-step checkout process, or you can buy wifi point to point with only one click by using your stored credit card information.

(3) Amazon Has Lots of Social Proof

Before you make a purchase for wifi point to point, you want to know that the company you are dealing with is legitimate and that others trust the company enough to make a purchase. You may also like to read what others are saying about the product in the review section. Amazon does all of this quite well.

(4) Amazon Has Great wifi point to point Images and Descriptions

In addition to still images, many of Amazon’s wifi point to point have videos. This makes it easier for you to see exactly what you are purchasing. Amazon’s wifi point to point descriptions are also quite good. In many cases, Amazon repeats the descriptions furnished by the manufacturer. In other cases, they write their own.

(5) The Amazon Site is Easy to Navigate

Navigating the Amazon site is easy. Even though the site is huge, you will not feel overwhelmed when searching for wifi point to point. This is partly due to Amazon’s filtering process. You can search for items by brand, price or user rating. You can also search for specific features.

How to Choose the Best wifi point to point (with Price and Reviews)

Although most wifi point to point are similar, there are several differences worth noting. Here are nine criteria to consider when choosing an wifi point to point:

(1) wifi point to point Price and Reviews

Although price is not the only factor to consider, it is nevertheless extremely important. The price of an wifi point to point should be in line with its value. You can compare wifi point to point reviews to make sure you are getting a fair price. This is easy to do on Amazon.

(2) Demand

The demand for a particular wifi point to point is a good indication of its ability to perform the functions for which it was designed. If a product has been around for a while and still has a high demand, it is likely a good product.

(3) Material

wifi point to point materials differ from manufacturer to manufacturer. Consider where and how you will be using your wifi point to point to determine if one material would be better than another.

(4) Size

Like most products, wifi point to points come in various sizes. Do you need a large wifi point to pointor a small one? Think about where you will use your wifi point to point in order to determine the best size. You can also read the customer reviews on Amazon to see what others are saying about the size of the unit they purchased.

(5) Color

wifi point to points also come in a variety of colors. Do you need a particular color? You should also consider whether the color of your wifi point to point would have any effect on the efficiency of its operation.

(6) Durability

The durability of an wifi point to point will be contingent on the materials used as well as the quality of the manufacturing process. Additionally, the type of wifi point to point you purchase may affect its durability.

(7) Storage

Will you need to store your wifi point to point? If so, you should consider the size and weight of the wifi point to pointto make sure that it can be stored properly. Also, give some consideration to the type of climate in which your wifi point to point will be stored.

(8) Customer Ratings

Customer rating is one of the best criteria for choosing an wifi point to point. It is hard to know exactly how an wifi point to point will perform until you get it home and try it out.

(9) Warranty

Make sure the wifi point to point you are considering is backed by a good manufacturer’s warranty. If it isn’t, you might be better off with another ones.

Categories: Trending