We’ve spent hundreds of hours researching and comparing Pineer Subwoofer of all specifications to find the best one for any need (or budget). Here are the results.
The Best Pineer Subwoofer of 2020 – Top Rated & Reviewed
2,451 Reviews Scanned
- This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers.
- The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output.
- High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier.
- Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to split the output and send it to the two line level inputs on the subwoofer.
- The subwoofer is housed in an attractive black wood cabinet that measures 13.75" x 11.75" x 11.75" (H x W x D). The driver and a 2 3/4" sound port are located on the front, covered by a black cloth speaker grill.
- Rockville RW10CA 800 Watt 10" Slim Car Subwoofer.
- 800 Watts Peak / 200 Watts RMS. PWM MOSFET Power Supply.
- Low Level RCA Input. High Level Inputs with Auto Turn-On Technology.
- Adjustable Input Sensitivity. Soft Delayed Remote Turn-On.
- Thermal Protection Circuit, Short Protection Circuit.
- New Pyle PLG64 6.5" 1200 Watt Car Subwoofers (4 Pack)
- 300 Watts Peak Power (1200 Watt Total)
- Yellow CD P.P. Cone
- Specially Treated Rubber
- Edge Suspension
- Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
- Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
- Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
- Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB8 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- HOME THEATER LFE POWERED SUBWOOFER - Dedicated LFE or standard RCA inputs easily connect to your home theater receivers Subwoofer Output. Save power with the added Signal Sensing Auto ON/OFF feature
- 600 WATTS PEAK POWER - Integrated high efficiency power amplifier, 22 - 250 Hz with 99dB at 8ohm, Auto ON/OFF and 0 - 180 degree Phase control switches, Gain and 40 - 140 Hz Crossover control knobs
- 15 INCH FRONT FIRING WOOFER - Long throw woofer with high rigidity PVA Treated cone, bottom slotted port, Bass Reflex cabinet with vibration absorbing feet, high quality MDF with internal bracing, black ash finish and removable acoustically transparent grill
- SYSTEM REQUIREMENTS - Standard US 110V grounded wall plug, any home theater receiver with RCA dedicated or LFE subwoofer outputs, home receiver or stereo with raw wire outputs. Use for home theater and surround sound systems
- WHAT'S IN THE BOX - Acoustic Audio by PSW600-15 powered subwoofer, 9 foot dual RCA/LFE cable, RCA "Y" adapter, instruction manual - Standing sub with feet size is (H x W x D) 20.5" × 18.5" × 16.5"
- 8-inch subwoofer and 120W amplifier, housed together in a cast aluminum enclosure
- The compact size measures just 13.5” L x 9” W x 3” D so it can be installed under or behind a seat in a truck, in a sedan’s trunk or in an SUV’s hatch
- 32Hz-150Hz frequency response, Power Rating: 120W RMS. RCA (0.1-4V) / Speaker Input (1.5-30V/auto sensing)
- RCA and Auto-sensing Speaker Level Inputs are located on the side panel, along with controls for Phase, Gain, LP Crossover and Remote Sub Level
- The PWE-S8 is an Authorized Online Product Sold By and Shipped from Amazon; visit the store locator on the Alpine USA website for professional installation
- 1 100 watts Max power (300 watts nom )
- Built with high bandwidth high output and low distortion 300-watt class D amplifier
- Size 10" cone
- Package Includes: (1) Rockville SS8P 400 Watt Slim Under-Seat Active Powered Car/Truck Subwoofer Sub, (1) Rockville RWK10 10 Gauge Amp Installation Kit ANL Fuse Holder 100% Copper RCA
- Features of SS8P: Rockville SS8P 8" 400w Slim Under-Seat Active Powered Car/Truck Subwoofer Sub, Enclosure is made out of cast aluminum which stays cool at all times, Peak Power Handling: 400 Watts, RMS Power Handling: 100 Watts, Heavy Duty Mounting Feet, PWM MOSFET Power Supply, Low Level RCA Input, High Level Inputs with Auto Turn-On Technology, Adjustable Input Sensitivity, Soft Delayed Remote Turn-On, Thermal Protection Circuit, Short Protection Circuit, Overload Protection Circuit
- Green Power/Red Protect LED, Phase Switch: 0° or 180°, Low Pass Filter: 50Hz - 150Hz, Bass Boost: 0 - 12dB @ 45Hz, Built in Subsonic Filter @ 20Hz, THD: < 0.4%, Subwoofer Level Remote Control, Fuse Rating: Single 10A
- Specifications of SS8P: Peak Power 400 Watts, RMS Power: 100 Watts, Impedance: 2 Ohm, Dimensions (L x W X H): 11.4" x 8.3" x 2.8" Inches, Frequency Response: 20Hz - 150Hz, Signal to Noise Ratio: >90dB, Sensitivity: 90dB @ 1w / 1m, Input sensitivity, Low level: 300mV, Input sensitivity, High level: 1.0V
- Features of RWK10: Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit, (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable, 17' 10 Gauge Translucent Blue SuperFlex Power Cables, 17 18 Gauge Blue Remote Cable, 17 16 Gauge Clear Speaker Wire, 3' 10 Gauge Clear SuperFlex Ground Wire, Gold Plated AGU Heat Resistant Fuse Holder, 40 Amp ATU Inline Fuse, 7 Split Tube Loom, Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
- 400 WATT POWER: This high powered audio projection carpeted subwoofer tube enclosure system has a maximum power output handling of 400 watts so you can play your favorite tracks as loud as you want and with style
- RUBBER EDGE SUSPENSION: The high-performance car woofer speaker has a specially treated black rubber edge suspension that completes your woofer enclosure system. Total size measures 11.5” diameter x 19.5” length
- 2” ALUMINUM VOICE COIL: This car speaker has 2” aluminum voice coil with 4-ohm impedance rating that compensates the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp & clear sound
- BLUE POLYPROPYLENE CONE: Pyle follows the standard size for most car stereo systems & created this 8" high power 4-ohm subwoofer w/ blue polypropylene cone perfect for new speaker construction, replacing worn or blown speakers
- 30Hz - 700kHz FREQUENCY: The 2” aluminum voice coil provides the punch, while the bass reflex vent adds even more sub-bass, ultimately achieving a frequency response of 30 Hz to 700 Hz. It is also super easy to install to your vehicle's sound system
- NEW PYLE **PLPW8D** 8" 3200W Dual Voice Coil 4 Ohm Car Audio Subwoofers (black) (4 Subwoofers)
- MAX Power: 800 Watts each (3200 Watts Total)
- RMS Power: 400 Watts each (800 Watts Total)
- Black Steel Basket
- Non Press Paper Cone
Top Rated Pineer Subwoofer to Buy Now
Pineer Subwoofer Reviews on Twitter
[custom-twitter-feeds search=”Pineer Subwoofer”]
Why You Should Buy Best Pineer Subwoofer from Amazon
Amazon is not the only store that sell Pineer Subwoofer. However, there are several compelling reasons why you should buy Pineer Subwoofer from them, with the suitable Price and Reviews. Here are five:
(1) Amazon Makes Shopping Pineer Subwoofer Personal
Amazon is very good at making recommendations of Pineer Subwoofer based on your search history. From time to time, they will even show you discounted prices on Pineer Subwoofer that you previously expressed an interest in. They also make your shopping experience a little easier by showing you items that you recently viewed.
(2) Amazon Checkout is Easy
Amazon checkout is easy, especially if you already have an account. You can add Pineer Subwoofer to your cart and go through a multi-step checkout process, or you can buy Pineer Subwoofer with only one click by using your stored credit card information.
(3) Amazon Has Lots of Social Proof
Before you make a purchase for Pineer Subwoofer, you want to know that the company you are dealing with is legitimate and that others trust the company enough to make a purchase. You may also like to read what others are saying about the product in the review section. Amazon does all of this quite well.
(4) Amazon Has Great Pineer Subwoofer Images and Descriptions
In addition to still images, many of Amazon’s Pineer Subwoofer have videos. This makes it easier for you to see exactly what you are purchasing. Amazon’s Pineer Subwoofer descriptions are also quite good. In many cases, Amazon repeats the descriptions furnished by the manufacturer. In other cases, they write their own.
(5) The Amazon Site is Easy to Navigate
Navigating the Amazon site is easy. Even though the site is huge, you will not feel overwhelmed when searching for Pineer Subwoofer. This is partly due to Amazon’s filtering process. You can search for items by brand, price or user rating. You can also search for specific features.
How to Choose the Best Pineer Subwoofer (with Price and Reviews)
Although most Pineer Subwoofer are similar, there are several differences worth noting. Here are nine criteria to consider when choosing an Pineer Subwoofer:
(1) Pineer Subwoofer Price and Reviews
Although price is not the only factor to consider, it is nevertheless extremely important. The price of an Pineer Subwoofer should be in line with its value. You can compare Pineer Subwoofer reviews to make sure you are getting a fair price. This is easy to do on Amazon.
The demand for a particular Pineer Subwoofer is a good indication of its ability to perform the functions for which it was designed. If a product has been around for a while and still has a high demand, it is likely a good product.
Pineer Subwoofer materials differ from manufacturer to manufacturer. Consider where and how you will be using your Pineer Subwoofer to determine if one material would be better than another.
Like most products, Pineer Subwoofers come in various sizes. Do you need a large Pineer Subwooferor a small one? Think about where you will use your Pineer Subwoofer in order to determine the best size. You can also read the customer reviews on Amazon to see what others are saying about the size of the unit they purchased.
Pineer Subwoofers also come in a variety of colors. Do you need a particular color? You should also consider whether the color of your Pineer Subwoofer would have any effect on the efficiency of its operation.
The durability of an Pineer Subwoofer will be contingent on the materials used as well as the quality of the manufacturing process. Additionally, the type of Pineer Subwoofer you purchase may affect its durability.
Will you need to store your Pineer Subwoofer? If so, you should consider the size and weight of the Pineer Subwooferto make sure that it can be stored properly. Also, give some consideration to the type of climate in which your Pineer Subwoofer will be stored.
(8) Customer Ratings
Customer rating is one of the best criteria for choosing an Pineer Subwoofer. It is hard to know exactly how an Pineer Subwoofer will perform until you get it home and try it out.
Make sure the Pineer Subwoofer you are considering is backed by a good manufacturer’s warranty. If it isn’t, you might be better off with another ones.